Linde Electric Pallet Truck Type 360: T16, T18, T20 Operating Instructions (User Manual)
Original Illustrated Factory Operating Instructions (User Manual) for Linde Electric Pallet Truck Type 360.
Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck
Format: PDF, 52 Pages
Plates and labels
Combination hour meter (operation).
Discharge limiter / indicator.
Daily checks and tasks prior to operation
Definition of safety terms.
Use of materials.
Periodic inspections of the truck.
Checks prior to initial operation.
Daily checks prior to use.
Checking the forward/reverse and lift/lower controls.
Checking braking system.
Checking the safety reverse button.
Checking the horn operation.
Checking the battery charge state.
Opening the battery cover.
Connecting / disconnecting the battery connector.
Charging the battery with a in-built charger*.
Replacing the mains plug on the truck after recharging.
Automatic disconnection of charging in the event of a probleme.
Electrical characteristics of the charger.
Recharging the battery using an external charger.
Checking the condition of the battery cables, terminals and connector.
Checking the electrolyte level, and topping up with water.
Checking the electrolyte specific gravity.
Removal/replacement of the battery.
Changing the battery using a hoist.
Changing the battery using a gantry (front exit model).
Instructions for use
Indication of the direction of travel
Forward travel / Reverse travel
Reversing the direction of travel
Safety reverse button
Starting on a slope
Braking, lifting, lowering, horn
Automatic LBC braking
Lifting / lowering the forks
Transporting the load
Before leaving the truck
Slinging the truck
Jacking the truck
Transport and storage of the truck
Inspection and maintenance after first
50 hours of operation *
Inspection and maintenance schedule.
Maintenance as required
Cleaning the truck
Checking the tightness of the wheel nuts
Checking the condition of the wheels
Fitting and adjustment of the stabiliser wheel
Opening the front cover
Pull the flexible cover clear to access the reduction gearbox and the motor
Checking the electrolyte level, and topping up with water
Checking the electrolyte specific gravity
Checking the condition of the battery cables, terminals and connector
Cleaning the battery and battery compartment
Maintenance every 500 hours
Checking and adjusting the brake control
Checking and adjusting the belt tension
Checking the hydraulic fluid level
Checking for leaks in the hydraulic system
Checking the condition and fastening of electrical cables and connections
Cleaning the electrical panel
Cleaning and checking contacts for wear
Inspection/replacement of the traction motor brushes
Checking miscellaneous joints
Maintenance every 1000 hours
Inspection/replacement of the pump motor brushes
Cleaning the hydraulic filter
Checking the mechanical fitting of components
Maintenance every 2000 hours
Changing the hydraulic fluid
Hydraulic system diagram
Electrical circuit diagram.